R21
MAZDA
MIATA MX-5
MAZDA MIATA MX-5 Tops with Manual Lift Glass Window and Glass
Window Upgrades
2912 --1990-97 MX-5 Miata Top with Manual Lift Tinted Glass
Window, No Rain Rail.
2913-- 1990-97 MX-5 Miata Top with Manual Lift Tinted Glass
Window, With Rain Rail.
Single Ring Pull Zipper must be unzipped before lowering glass
window by hand; and Top
must be raised before lifting glass by hand to zip into top for
2912 and 2913.
Glass can be lowered down when Top is raised. Hardware kit and
instructions included.
Glass Heatsealed into topping in 2912 and 2913. (Must use Rain
Rail from old top to install 2913)
TN212
--1990-97
Replacement Manual Lift Tinted Glass Window for 2912 and 2913.
NOTE: Always Check for
Deterioration of Backing in Old Top BEFORE Installing TN292H or
TN293.
Replace Top if Old Top is Badly Worn or Deteriorated.
TN212H
--1990-97
2900, 2901 Top Manual Lift Tinted Glass Window Upgrade.
Glass Window Zips into 2900 or 2901 Tops with Single Ring Pull
Zipper Only.
TN213-- 1990-97 Mazda Factory Top Manual Lift Tinted Glass
Window Upgrade.
Glass Window assembly made with complete zipper flap and Single
Ring Pull Zipper.
Zipper flap mounts to rear bow with metal retainer. (Factory top
zipper flap must be cut off)
Glass can be lowered down when Top is raised when TN212H or TN213
is installed.
NOTE: Hardware Kit and
instructions supplied, and rain rail from old top must be
used to install TN212,TN212H, and TN213.
MAZDA
MX-5 MIATA Glass Window Notes
GLASS WINDOW TOP AND GLASS
WINDOW UPGRADE NOTES
1. Factory Top Boots will
fit tighter, and will be slightly more difficult to put on because
the
folded down top rests higher than tops with plastic windows, due
to spacers we include
to install beneath the factory top stops to accommodate the glass
window.
2. Always Unzip Single Ring Pull Zipper before lowering Top or
Glass Wlndow Upgrades.
3. Always check behind seats to make sure area is clear before
lowering top or glass window.
4. Always pull topping away when lowering 2902, 2903 Tops or TN292H
or TN293
Glass Window Upgrades with our Patented Track System to avoid
damage to top from pinching.
5. Always use Mazda 3- Wire Connector, part # N007-67-O60A, when
installing 2910/2911 Tops,
or HD292, HD292H and HD293 Heater/Defroster Glass Window Upgrades.
6. Enjoy the View!
RED NUMBERS ARE
ROBBINS PART #, BLUE NUMBERS ARE THE YEAR
THAT TOP FITS
HOURS LISTED ARE FOR INSTALLATION OF TOP AND WINDOW OR HEADLINER
Home